Sierra

Delco Inline 6 Tune-Up Kit

Delco Inline 6, single point.

NGK - TR5-2238 Spark Plug

NGK #TR5-2238 spark plug.V-Power Plug, 14mm thread size, 17.55mm (.691") reach, 5/8" (16mm) hex dize, tapered seat, resistor, removable terminal nut, projected tip, V-Power (V-Grooved Centered Electrode), .040" (1.02mm) gap, heat range 5.V-Power spark...

Sierra

Carter/Weber Carburetor Renew Kit

Carter/Weber carburetor renew kit for MerCruiser sterndrives.Replaces MerCruiser #809064

Centek Industries Inc.

3 in. x 3.5 in. Fiberglass Exhaust Reducer Coupling

3 in. to 3.5 in. Fiberglass Exhaust Reducer Connects 3 in. inside diameter hose to 3.5 in. inside diameter hose 9.5 in. length Designed for use in marine exhaust systems

Michigan Motorz

Level 1 Support

Add to cart and purchase. Technician will call you back from 9am-5pm Monday-Saturday. One hour of phone support by a trained technician General topics to include but not limited to: General service questions Removal and installiation of an engine or...

Sierra

Carburetor Renew Kit - Rochester 2 bbl. - Volvo Penta, OMC

Carburetor renew kit for 2 bbl. Rochester carburetor, Volvo Penta, OMC.Replaces Volvo Penta #841994-7; OMC #984487

Sierra

Brass Float

Brass float,alcohol resistant, 1 per pack.Replaces MerCruiser 1397-26; OMC 381389; Crusader 45303.

Sierra

Composite Pulley

Composite pulley, replaces Mercury 807757T

Centek Industries Inc.

Fiberglass Elbow - 90°, 4" o.d.

Fiberglass elbow, 90°, 4" o.d.

Marlan

I/O Engine Wire Harness + Options 3ft -35ft

3' length I/O engine harness has a molded 8-way on one end and round 9-way, ninth wire is tan/blue. The harness is spiral taped. Fits most inboard engines. Standard lengths available are: 3', 10', 16', 18', 20', 25' & 35'.Select from the drop-down menu...

Sierra

Impeller - MerCruiser #47-85089-3

Impeller - diameter 2-7/8"; depth 1/2" - 6 fins - Neoprene.Replaces: MerCruiser #47-85089-3

Sierra

Impeller - OMC/Cobra Sterndrives - 1987-92

Impeller - diameter 2-5/16"; depth 1-5/8" - 10 fins - Neoprene, for OMC/Cobra Sterndrives, 1987-92. Fits: 2.3L, 2.5L, 3.0L, 4.3L, 5.0L, 5.7L, 5.8L, 7.5L, 454 and 460.

Sierra

5” & 6" Exhaust Flapper w/ Clamp

5” & 6" exhaust flapper w/clamp.Prevents backflow of water into exhaust system.Stainless steel clamp included.

Sierra

U-Joint Drive Shaft Bellows

U-Joint drive shaft bellows. Alpha I U-Joint Bellows For MerCruiser Alpha I, R, MR, TR and TRS drives For all #1 units with ridge Stainless steel clamps includedSerial #3469428 & up

Sierra

Prestolite V6 Distributor Cap

Prestolite distributor cap, V6, replaces:MerCruiser #392-9086Volvo Penta #841929-9OMC #983489Prestolite #3-149Pleasurecraft, Crusader #41069

Rule-A-Matic

Rule-A-Matic Float Switch

Turns pump on when water level reaches 2"; turns pump off when water level reaches 3/4". Automatic on/off control of any 12 or 24 volt dc electric bilge pump or alarm For use with Rule bilge pumps drawing up to 14 amps (12 volts), 7 amps (24...

Edelbrock

Edelbrock Carburetor Rebuilding Kit - 1477

Edelbrock "Performer Series" carburetor rebuilding kit. Includes parts & gaskets to rebuild all Edelbrock square-bore carburetors.NOTE: Please check your engine application prior to ordering. If you order this kit and it does not work for your...

MerCruiser

MerCruiser I/O Trim Harness

20ft Electrical connection harness to engine to raise and lower outdrive.

Light Harness

Attached to a 3-position push/pull switch. Leads are 10" to each light with fused lead to battery.

Chrysler

Oil Sending Unit - Dual Station

Oil sending unit - 1/8" NPTF American, 100 PSI, dual station.

MerCruiser

MerCruiser Wire Harness Assembly-1

MerCruiser wire harness assembly 84-862081 A13.0L Mercury Marine OEM. Non-returnable.

MerCruiser

MerCruiser Exhaust Y-Pipe Assembly with Shutters

New MerCruiser exhaust Y-pipe assembly. Used with MerCruiser Alpha and Bravo outdrives and sterndrives with 7° 4-inch elbows.Replaces part #'s 44266T, 44266T 1, 44266T1, 807130A 4, 807130A4. Water shutters included.

Sierra

Gasket, Exhaust Straight Inline - Early Model 4 cyl.

(1) Manifold to head gasket.GM Inline 4 cyl., 140 hp, early model MerCruiser Replaces:MerCruiser #27-53354OMC #908079

Sierra

Water Shutter Exhaust Assembly - #807166A3

(1) Water shutter exhaust assembly. Replaces MerCruiser #807166A3 and #14348A1

Sierra

Water Shutter Exhaust Assembly - #60930

Water shutter exhaust assembly, fits MerCruiser 4 cyl., V8 SB. Replaces MerCruiser #60930

Sierra

Water Shutter Exhaust Assembly - #99370A2

Water shutter exhaust assembly, fits MerCruiser V6 & V8 sterndrives, 1982-87. Replaces MerCruiser #99370A2

Michigan Motorz

8.1L Ignition Wire Set

8.1L ignition wire set. *clips are not included Replaces:Volvo Penta part #3861295MerCruiser part #84-881698

DART

Dart SBC Dual Plane Manifold - Standard Port (1986-Earlier)

Dart small-block Chevy manifold with standard ports, dual-plane intake features a lowered valley cover with an open area under the plenum that allows free flow of air and isolates the hot oil chamber from the plenum, this creates a cooling effect on the...

Marine Power

Cooler Dual Oil 5 x 9

Dual oil cooler used on Marine Power inboard engines. 1-1/4" Seawater inlet/outlet 1/2" Inverted flair oil fittings 5" & 9" cores 17" Overall Length Replaces Boatman's iNet Marine SKMP513526 Replaces Marine Power part # 0440-549G3, 513526, etc.

CDI Electronics

Neon Inline Spark Gap Tester - 8 cyl.

Neon inline spark gap tester - 8 cyl. - for 1,2,3,4,6 & 8 cylinders.Can be used on many marine applications including MerCruiser, Volvo Penta, OMC, Johnson, Evinrude, Yamaha, Honda, Sea Doo, etc.

CDI Electronics

Neon Inline Spark Gap Tester - 1 cyl.

Neon inline spark gap tester - 1 cyl.

Hardin Marine

Throttle Cable Bracket - Stainless Steel - Edelbrock

Stainless steel, throttle cable bracket for Edlebrock carburetors. This stainless steel throttle bracket will allow mounting of all popular cable clamps. This bracket mounts above the carburetor flange to provide a solid mounting point for your cable...

Holley

Throttle Cable Bracket - Square Bore - Holley, Edelbrock

Square bore throttle cable bracket, steel chrome for Holley & Edlebrock carburetors. (Not for use with Rochester Q-Jet, Holley 4175). Adapt your throttle cable bracket to your marine carburetor.This steel chrome plated spread bore style throttle bracket...

HGE

MerCruiser Aluminum Exhaust Tube - Set of 2

MerCruiser aluminum exhaust tubes - (2) per set.

MerCruiser

MerCruiser Water Shutter Assembly

MerCruiser OEM 4" water shutter, fits several MerCruiser applications. This water shutter valve has a butterfly action and comes with two square grommets.2-1/2" wide X 6-1/8" long

Crusader

Crusader Impeller Kit with O-ring

Crusader impeller kit with O-ring.Fits 5.7L, 6.0L and 8.1L models with serpentine belt driven water pumps.